General Comments on Manufacturing Limits
This represents a general list of soft limits and is intended for reference only.
As requirements move closer to a min or max shown, the more challenging the part will be.
Manufacturing Limits for Prism Surfaces
| wdt_ID | Attribute | Minimum | Maximum |
|---|---|---|---|
| 1 | Diameter (mm) | 3 | 300 |
| 2 | Thickness | 1 | 150 |
| 3 | Aspect Ratio¹ | 1 | 50² |
- Diameter divided by thickness
- This represents the highest values obtained. When at maximum other minimums (irregularity) may not be possible. Will be smaller with less well-behaved materials.
For more detailed information on any attribute, please contact sales@optimaxsi.com.